Morning Show Project by DAZ Neverending Do Nothing Monday, December 3, 2003
Special Note: Please forgive my delay in posting this project. It was a challenge to figure out and to write up. I want to thank all of you, who contacted me and shared your memories. I hope these instructions will help create many more. Have a Happy and Safe Holiday Season and of course, I hope you have fun making it, DAZ

Supplies: 12 square or rectangle wooden cut outs all the same size Elmer's Glue 3 yds. Ribbon, (I used 2 yds of one color, 1 of another) Scissors

Instructions:
	1. Cover one side of each wooden cutout with glue.
	2. Lay the end of the single color ribbon in the middle of the cut out with the excess ribbon on the right.  3. Now lay the ends of the other ribbon on either side of the middle ribbon across the cutout with the excess ribbon on the opposite side or the left side.
	4. Put another cutout on top, with the glue side down. Press together.
	5. Now cross the middle ribbon over the top so the excess is on the left and the outside ribbons over so their excess is on the right.  6. Stack a cutout on top with the glue side up.  7. Cross all ribbons to the opposite sides. Make sure the ribbon is tight.
	8. Place cutout on with glue side down. Press together.  9. Cross ribbon to opposite sides. 10. Stack cutout with glue side up. 11. Cross over ribbons.
	12. Place cutout with glue side down, press firmly.
	13. Continue this routine until you are on the last cutout that has glue side up. 14. Cut the ribbon so that the ends will fall in the center of the cutout. Now stack last cutout glue side down. Press, let dry.
Back to Projects
E-mail: DAZ@DAZigns.com